Kitchen Units Accrington | Rigid Built, Made to Order | SJB Kitchens

Quality kitchen units for Accrington homes — that’s what SJB is all about. I’m Steve, a kitchen specialist with over two decades of experience, and I supply rigid-built units directly to homeowners from my Oldham showroom, about 20 miles from Accrington. Every unit is made to order, uses 18mm Egger or Kronospan carcasses, and comes with Blum soft-close hardware as standard.

Accrington is the heart of Hyndburn, a borough with some of the most affordable housing in Lancashire. That affordability means homeowners can invest more in quality renovations — and a rigid-built kitchen from SJB costs significantly less than the equivalent from Howdens or Wren. The town’s Victorian terraces and stone-built homes have real character, and they deserve kitchen units built to match.

I’ve been supplying kitchens to homeowners for over 20 years. The product I supply is built to a genuinely higher standard than anything you’ll find at Howdens, Wren, or Magnet — and it costs 30–50% less. Every unit uses 18mm Egger or Kronospan carcasses with solid 18mm backs and Blum soft-close hardware as standard.

Quality you can see and feel. Visit the Oldham showroom (around 30 minutes from Accrington) and the difference is immediately obvious. Pick up an SJB carcass and feel the weight of the 18mm board. Open a door and feel the smooth Blum soft-close mechanism. Pull out an Antaro drawer and notice how it glides. Then compare that to what you’ve seen at Howdens or Wren. The quality gap is real.

Supplied direct, priced fairly. By working directly with our manufacturer and keeping overheads low, Steve can offer Accrington homeowners kitchen units at 30-50% less than Howdens — without cutting any corners on quality. Every unit uses 18mm Egger or Kronospan carcasses with solid 18mm backs.

Designed for your exact kitchen. Victorian terraces in the town centre, stone-built homes in Oswaldtwistle and Clayton-le-Moors, 1930s semis in the residential areas, and some newer developments — Accrington’s housing stock is varied, and standard kitchen sizes rarely fit properly. Every SJB unit is made to order, so whether you need a 487mm base unit or a reduced-depth wall cabinet, it’s built to your exact measurements.

Blum as standard, not an upgrade. At Howdens, Blum hardware is often an optional extra. At SJB, Blum soft-close hinges and Antaro drawer systems come as standard on every single unit. It’s the hardware that premium German kitchens use — and you get it at no extra cost.

One person, start to finish. Steve handles everything — from the initial conversation to the CAD design, quotation, order, and delivery coordination. You’re never passed between departments or left waiting for callbacks. Call 0161 509 4221 and you speak to Steve.

Victorian terraces (Town centre, Spring Hill, Peel Park) — Classic East Lancashire terraces with compact kitchens — made-to-order units ensure a seamless wall-to-wall fit

Stone-built homes (Oswaldtwistle, Clayton-le-Moors, Church) — Solid stone properties with character — bespoke sizing handles the thick walls and uneven floors that come with older buildings

1930s semis (Woodnook, Huncoat, Rising Bridge) — Family homes with good-sized kitchens — rigid-built units with Blum soft-close hardware are a practical, long-lasting choice

Newer developments (Huncoat, Accrington outskirts) — Even in newer homes, upgrading from developer-grade to 18mm rigid units makes a noticeable difference to quality and longevity

SJB kitchen units for Accrington homes are specified to outperform the competition on every measure:

Carcass: Full 18mm Egger or Kronospan MFC on all panels — top, bottom, sides, and back. While Howdens and Wren use 3mm hardboard for the back panel, SJB uses the same 18mm board throughout. This creates a box structure that’s dramatically stronger and more resistant to racking.

Drawers: Blum Antaro drawer systems as standard. Full extension means you can access the entire drawer contents. Soft close means no slamming. The Antaro system is rated for tens of thousands of cycles and carries Blum’s own lifetime guarantee.

Hinges: Blum soft-close hinges on every door. These are the same hinges used in premium European kitchens — smooth, quiet, and virtually indestructible. They’re included as standard, not offered as an expensive upgrade.

Customisation: Every unit is made to order with custom heights, depths, and widths. This is essential for Accrington’s varied housing stock, where standard sizes from off-the-shelf ranges rarely fit properly.

Finishes: Carcasses are available in over 300 MFC finishes from Egger and Kronospan, all with colour-coordinated edging. Six door ranges — Painted Shaker, Handleless Matt, Handleless Gloss, Slab Matt, Slab Gloss, and Shaker Foil — each offer their own selection of colours and finishes.

Assembly: Rigid built in a workshop, not flat-packed in a box. cam and dowel joints provide permanent structural integrity. Your units arrive ready to install.

In an age of disposable furniture, SJB kitchen units are designed to last. Here’s why that matters for Accrington homeowners — and for the environment.

20-year lifespan vs 5-year replacement. A cheap flat-pack kitchen might need replacing after 5-7 years as the hardboard backs bow, the cam locks loosen, and the budget hinges wear out. An SJB rigid-built kitchen with 18mm backs and Blum hardware will last 20 years or more. That’s three or four cheap kitchens you won’t need to buy — and three or four kitchens that won’t end up in landfill.

Quality materials from responsible sources. Egger and Kronospan are both committed to responsible forestry and sustainable manufacturing. The MFC boards used in SJB kitchens are produced to exacting environmental standards.

Blum hardware: built for a lifetime. Blum tests its hinges and drawer systems to withstand hundreds of thousands of cycles — far beyond what any kitchen will experience in normal use. This means no replacement hinges, no failed drawer runners, and no unnecessary waste.

Made to order means no waste. Every SJB kitchen is built to your exact specifications. There are no surplus units, no off-cuts from standard sizes, and no wasted materials. You get exactly what you need, and nothing goes to waste.

A kitchen that adds value. A well-built kitchen adds genuine value to your Accrington home. If you ever sell, a rigid-built kitchen with quality hardware is a genuine selling point — unlike a tired flat-pack kitchen that puts buyers off.

There’s a fundamental difference between flat-pack and rigid-built kitchen units — and it matters more than most people realise.

Flat-pack units (like those from Howdens, Wren, and most DIY stores) arrive as a box of panels, fixings, and instructions. They’re assembled on site by your fitter, using cam locks and dowels to hold the panels together. The backs are typically 3mm hardboard, pinned or stapled into a groove.

Rigid-built units (like every SJB kitchen) are assembled in a workshop using industrial machinery. The joints are cam and dowel for permanent strength. The 18mm solid backs are fully integrated into the carcass structure, providing genuine rigidity.

The practical difference is significant. A flat-pack unit with a 3mm back will start to rack and flex over time, especially under the weight of heavy items or in damp conditions. A rigid-built unit with an 18mm back stays perfectly square and solid for 20 years or more.

For Accrington homeowners, this matters because Lancashire’s climate — with its temperature variation and occasional damp — puts real demands on kitchen furniture. Investing in rigid-built units is investing in a kitchen that will genuinely last.

Steve supplies the kitchen units — but what about installation? Here’s what Accrington homeowners need to know.

Steve is a kitchen specialist, not a fitter. This is deliberate. By focusing entirely on supplying the highest quality kitchen units, Steve can offer better products at lower prices. Installation is handled by your chosen fitter — and Steve can recommend experienced kitchen fitters who work in the Accrington area.

Rigid-built units are easier to install. Because SJB units arrive fully assembled, your fitter doesn’t need to spend time building flat-pack carcasses. This means faster installation, lower fitting costs, and a better end result. Most fitters prefer working with rigid units for exactly this reason.

Coordinate with your fitter early. Once you’ve confirmed your order with Steve, share the CAD design with your fitter so they can plan the installation. Steve’s designs include all the technical details a fitter needs — unit dimensions, service positions, and fixing requirements.

Plan your electrics and plumbing first. Before the kitchen units go in, make sure your electrics and plumbing are in the right positions. Steve’s CAD design will show exactly where appliances and services need to be, which makes first-fix work straightforward.

Allow time for the right result. A typical kitchen installation takes 3-5 days depending on the size and complexity. Don’t rush it — a well-installed kitchen will give you 20 years of daily use, so it’s worth taking the time to get it right.

Accrington’s famous Nori brick gives the town’s terraces a distinctive warm red colour. A shaker kitchen in cream or ivory creates a warm, inviting contrast with the red brickwork.

I supply six door ranges that cover every style — from traditional to ultra-modern. Click any image below to see the full range and colour options.

Here’s the simple process for getting quality kitchen units delivered to your Accrington home.

Initial conversation. Call Steve on 0161 509 4221 or complete the enquiry form below. Describe your kitchen space, your style preferences, and your budget. Steve will give you straightforward, honest advice — no sales pitch, no pressure.

Professional design. Send your room measurements by email or bring them to the Oldham showroom (around 30 minutes from Accrington). Steve will create a full CAD kitchen design showing every unit in your new kitchen, complete with a detailed, itemised quotation.

Review and confirm. Take your time to review the design and quote. Make changes if needed — Steve will revise the design until you’re completely happy. There’s no rush and no obligation.

Made to order. Once confirmed, your kitchen goes into production. Every unit is built to your exact measurements using 18mm Egger or Kronospan carcasses with Blum hardware as standard.

Delivery and installation. Accrington is connected to our Oldham base via the M66 and A56. We deliver across the whole Hyndburn borough including Oswaldtwistle, Clayton-le-Moors, and Great Harwood. Your rigid-built units arrive fully assembled, ready for your fitter to install. Steve can recommend trusted fitters in the Accrington area if needed.

As well as Accrington, Steve supplies kitchen units across Lancashire including Blackburn, Burnley, Haslingden, Oswaldtwistle, Clayton-le-Moors, Great Harwood. Whether you’re in Accrington itself or one of the surrounding areas, the same quality, pricing, and service applies. Delivery is available to all addresses in the region, typically from 10 working days.

Looking for more information? See our pages on trade kitchen cabinets and DIY kitchen supply for more details on what SJB offers.

Do you supply worktops?
Steve can advise on worktop options and help you source the right worktop for your kitchen. The focus is on supplying the highest quality kitchen units — and making sure everything works together as a complete kitchen.

How do I get started?
Call Steve on 0161 509 4221, fill in the form on this page, or visit the showroom at Unit N, Central Trading Estate, Coulton Close, Oldham, OL1 4EB. Bring your room measurements if you have them — or Steve can talk you through how to measure up.

How does pricing work?
Steve provides a detailed, itemised quote for every kitchen. Every unit, every door, every piece of hardware is listed with a clear price. There are no hidden costs, no vague estimates, and no surprises. Transparent pricing is a core part of how SJB operates.

Are the units rigid or flat-pack?
All SJB kitchen units arrive fully assembled and rigid built. They’re not flat-pack — they’re built properly in a workshop and delivered ready for your fitter to install. This means they’re stronger, squarer, and longer-lasting.

Can I visit the showroom?
Absolutely. The showroom is at Unit N, Central Trading Estate, Coulton Close, Oldham, OL1 4EB. No appointment needed — just come in, see the carcass construction, feel the Blum hardware, and look at the door samples.

Do you deliver to Accrington?
Yes — Accrington is connected to our Oldham base via the M66 and A56. We deliver across the whole Hyndburn borough including Oswaldtwistle, Clayton-le-Moors, and Great Harwood. Call Steve on 0161 509 4221 or fill in the form on this page to get started.