Kitchen Units Keighley | Rigid Built, Made to Order | SJB Kitchens

If you’re searching for kitchen units near Keighley, you’ve found the right place. I’m Steve, and I run a small kitchen showroom in Oldham — just around 45 minutes from Keighley. I work directly with our manufacturer to supply rigid-built kitchen units that are genuinely better than anything you’ll find at Howdens, Wren, or Magnet.

Keighley sits at the gateway to Bronte Country, with the Worth Valley stretching south towards Haworth and Oxenhope. The housing stock is predominantly stone-built, reflecting the area’s industrial and literary heritage. These are properties with real character — and they need kitchen units that can be made to fit their non-standard dimensions. SJB’s made-to-order service is ideal for Keighley’s older, characterful homes.

I’ve been supplying kitchens to homeowners for over 20 years. The product I supply is built to a genuinely higher standard than anything you’ll find at Howdens, Wren, or Magnet — and it costs 30–50% less. Every unit uses 18mm Egger or Kronospan carcasses with solid 18mm backs and Blum soft-close hardware as standard.

A kitchen specialist, not a chain. I’m Steve, and I’ve been in the kitchen industry for over 20 years. I work directly with our manufacturer to supply rigid-built units at prices that undercut Howdens by 30-50%. When you buy from SJB, you’re dealing with someone who genuinely knows kitchens — not a sales team working to targets.

Built to last in Keighley. Keighley’s housing stock includes Stone-built terraces in the town centre, weavers’ cottages in Haworth and Oakworth, 1930s semis in the residential areas, and larger homes in Silsden and the Worth Valley. These properties need kitchen units that can handle real life — and that means 18mm carcasses with solid 18mm backs, not the 3mm hardboard that Howdens and Wren use. My units are rigid built, not flat-pack, and they arrive fully assembled and ready for installation.

Every unit made to your measurements. No two kitchens are the same — especially in Keighley, where the housing stock spans several eras. Every SJB unit is made to order with custom heights, depths, and widths. Whether you need a narrow base unit for a tight corner or a full-height larder for a spacious kitchen-diner, it’s all made to your exact specifications.

Blum hardware as standard. Blum soft-close hinges and Antaro drawer systems are included on every unit — not offered as an expensive upgrade. This is the same hardware used in premium German kitchens, and it’s built to last hundreds of thousands of cycles.

Visit the showroom. The showroom is at Unit N, Central Trading Estate, Coulton Close, Oldham, OL1 4EB — around 45 minutes from Keighley. Come in, see the carcass quality, feel the Blum hardware, and look at over 300 MFC finishes. No appointment needed.

Stone terraces (Town centre, Lawkholme, Fell Lane) — Keighley’s stone terraces have compact kitchens with thick walls — made-to-measure units are essential for a proper fit

Weavers’ cottages (Haworth, Oakworth, Stanbury) — Historic Bronte Country properties with low ceilings and character features — custom heights and depths ensure a perfect fit

1930s semis (Utley, Riddlesden, Long Lee) — Family homes with good-sized kitchens — rigid-built units with Blum soft-close hardware are a practical, long-lasting choice

Larger homes (Silsden, Steeton, Eastburn) — Spacious properties with room for island units, larder towers, and full-height wall cabinets — all made to your exact specifications

Every kitchen unit supplied to Keighley homes meets the same exacting specification:

18mm Egger and Kronospan carcasses — not the 15mm or 16mm chipboard used by many competitors. The full 18mm thickness provides superior rigidity and durability, and the quality of Egger and Kronospan board is recognised across the industry.

18mm solid backs — this is one of the biggest differences between SJB and Howdens. Howdens uses 3mm hardboard backs on their units. SJB uses 18mm solid backs — the same thickness as the carcass itself. This keeps the unit perfectly square and rigid for decades, preventing the bowing and sagging that plagues cheaper kitchens.

Blum soft-close hinges and Antaro drawers — Blum is the gold standard in kitchen hardware. Every SJB unit comes with Blum soft-close hinges and Blum Antaro drawer systems as standard. These are engineered to last hundreds of thousands of cycles — far beyond the lifetime of the kitchen itself.

Over 300 MFC carcass finishes — with colour-coordinated edging to match. Carcasses are available in over 300 MFC finishes from Egger and Kronospan, from classic whites and creams to bold contemporary colours, woodgrains, and concrete effects. Door styles — Painted Shaker, Handleless Matt, Handleless Gloss, Slab Matt, Slab Gloss, and Shaker Foil — each have their own colour options.

Rigid construction — every unit arrives fully assembled, not flat-pack. This means stronger joints, better alignment, and a kitchen that’s ready for your fitter to install straight from the delivery van.

Planning a new kitchen in Keighley? Here are some practical tips from Steve’s 20+ years of experience.

Measure twice, order once. Accurate measurements are the foundation of a great kitchen. Steve can talk you through exactly how to measure your room — or you can bring your measurements to the Oldham showroom and he’ll check them with you.

Think about workflow. The classic kitchen triangle — sink, hob, fridge — still matters. A well-planned layout makes cooking easier and more enjoyable. Steve’s CAD design service helps you visualise the workflow before you commit.

Don’t forget storage. Larder towers, deep drawers, and corner carousel units can dramatically increase your storage capacity. Made-to-order means you can have exactly the storage solutions your kitchen needs.

Consider the lighting. Under-cabinet lighting, pendant lights over an island, and task lighting above the worktops all make a huge difference. Plan your electrics before the kitchen goes in.

Choose your style early. Whether you prefer the warmth of a painted shaker or the clean lines of a handleless design, choosing your door style early helps guide the rest of the design process. Steve has six ranges to choose from, each available in a wide selection of colours.

If you’ve been looking at Howdens for your Keighley kitchen, it’s worth understanding the key differences before you commit.

Construction: Howdens units use 3mm hardboard backs. SJB units use 18mm solid backs — the same thickness as the carcass. This single difference has a massive impact on long-term rigidity and durability. A unit with a 3mm back will eventually bow under load; a unit with an 18mm back stays perfectly square for decades.

Assembly: Howdens units arrive flat-pack and need to be assembled on site. SJB units arrive rigid built and fully assembled. This means faster installation, stronger joints, and no risk of assembly errors.

Hardware: Blum soft-close hinges and Antaro drawers are standard on every SJB unit. At Howdens, soft-close is often an upgrade — and the standard hardware is noticeably inferior to Blum.

Access: Howdens requires a trade card — they won’t sell directly to homeowners. SJB sells directly to you, with transparent pricing and no trade card requirement.

Price: Despite the higher specification, SJB kitchens typically cost 30-50% less than the equivalent Howdens kitchen. That’s not a typo — you genuinely get a better product for less money.

There’s a fundamental difference between flat-pack and rigid-built kitchen units — and it matters more than most people realise.

Flat-pack units (like those from Howdens, Wren, and most DIY stores) arrive as a box of panels, fixings, and instructions. They’re assembled on site by your fitter, using cam locks and dowels to hold the panels together. The backs are typically 3mm hardboard, pinned or stapled into a groove.

Rigid-built units (like every SJB kitchen) are assembled in a workshop using industrial machinery. The joints are cam and dowel for permanent strength. The 18mm solid backs are fully integrated into the carcass structure, providing genuine rigidity.

The practical difference is significant. A flat-pack unit with a 3mm back will start to rack and flex over time, especially under the weight of heavy items or in damp conditions. A rigid-built unit with an 18mm back stays perfectly square and solid for 20 years or more.

For Keighley homeowners, this matters because West Yorkshire’s climate — with its temperature variation and occasional damp — puts real demands on kitchen furniture. Investing in rigid-built units is investing in a kitchen that will genuinely last.

Haworth’s weavers’ cottages are some of the most characterful homes in Yorkshire. A painted shaker kitchen in a deep, rich colour like Farrow & Ball Hague Blue or Studio Green creates a kitchen worthy of Bronte Country.

I supply six door ranges that cover every style — from traditional to ultra-modern. Click any image below to see the full range and colour options.

Getting your new kitchen from SJB is simpler than you might expect — especially if you’re in Keighley.

Talk to Steve first. Whether you call 0161 509 4221, fill in the form on this page, or visit the Oldham showroom (around 45 minutes from Keighley), the first step is always a conversation. Tell me about your home, your kitchen, and what you want to achieve. I’ll give you honest advice based on over 20 years of experience.

Detailed CAD design. Once I have your room measurements, I’ll create a professional CAD design showing exactly how your new kitchen will look. Every unit is drawn to scale, and the accompanying quote lists every item with a clear price. There are no hidden costs.

Built to your specifications. Every unit is made to order — custom heights, depths, and widths are all available. Your kitchen is built with 18mm Egger or Kronospan carcasses, 18mm solid backs, and Blum soft-close hardware as standard.

Delivered to your door. Keighley is reached from our Oldham base via the M62 and A629. We deliver across the whole Keighley area including Haworth, Silsden, and the Worth Valley villages. Units arrive fully assembled and rigid built — your fitter can start installation straight away.

Showroom visit. If you’d like to see the quality before you order, the showroom is at Unit N, Central Trading Estate, Coulton Close, Oldham, OL1 4EB. No appointment needed — just come in and have a look around.

As well as Keighley, Steve supplies kitchen units across West Yorkshire including Bingley, Skipton, Ilkley, Haworth, Silsden, Cross Hills. Whether you’re in Keighley itself or one of the surrounding areas, the same quality, pricing, and service applies. Delivery is available to all addresses in the region, typically from 10 working days.

Looking for more information? See our pages on trade kitchen cabinets and DIY kitchen supply for more details on what SJB offers.

Do you supply worktops?
Steve can advise on worktop options and help you source the right worktop for your kitchen. The focus is on supplying the highest quality kitchen units — and making sure everything works together as a complete kitchen.

What door styles do you offer?
Six main ranges: Painted Shaker, Handleless Matt, Handleless Gloss, Slab Matt, Slab Gloss, and Shaker Foil. Each range is available in a wide selection of colours, and with over 300 MFC finishes for carcasses, the combinations are virtually limitless.

What hardware do you use?
Blum soft-close hinges and Blum Antaro drawer systems come as standard on every unit. Blum is the industry benchmark for kitchen hardware — smooth, quiet, and built to last hundreds of thousands of cycles.

What’s the quality of the drawer systems?
Every SJB kitchen uses Blum Antaro drawer systems as standard. These are full-extension, soft-close drawers with a clean, modern design. They’re engineered to handle heavy loads and last for the lifetime of the kitchen — far superior to the budget drawer runners used by most competitors.

What’s the difference between your units and what I’d get from a DIY store?
The main differences are construction quality and materials. SJB units use 18mm Egger or Kronospan carcasses with 18mm solid backs and Blum hardware as standard. Most DIY store kitchens use thinner carcasses with hardboard backs and budget hinges. The result is a kitchen that’s stronger, squarer, and lasts significantly longer.

What if I need to change my order?
Because every kitchen is made to order, Steve works closely with you to get the design right before production begins. If you need to make changes during the design stage, that’s no problem at all. Once production starts, changes become more difficult — which is why the design stage is so thorough.

Can I order just replacement doors?
Steve specialises in complete kitchen unit supply, but it’s worth getting in touch to discuss your specific requirements. Call 0161 509 4221 or fill in the form on this page.

Do you deliver to Keighley?
Yes — Keighley is reached from our Oldham base via the M62 and A629. We deliver across the whole Keighley area including Haworth, Silsden, and the Worth Valley villages. Call Steve on 0161 509 4221 or fill in the form on this page to get started.