Kitchen plan handover: what your supplier and fitter need before you order
A kitchen plan handover is the point where everyone needs to stop working from slightly different information. Your supplier may have the latest cabinet layout, while your fitter has an earlier drawing and your appliance retailer has confirmed a different dishwasher.
Before you order, bring those details together. The aim is not another design checklist: it is a clear record of which version is being ordered, who has checked the site assumptions and which decisions still need an answer.
Agree who checks what
For a supply-only kitchen, agree the checks with each person rather than assuming someone else has done them.
- You, the customer: confirm your preferred layout, door range, finish, handles and storage choices. Choose and appoint your own fitter and other suppliers, then give explicit approval to place the agreed furniture order.
- Your fitter or appointed site measurer: agree who will verify room measurements, finished-floor assumptions, obstacles and practical installation details before ordering. Ask them to identify anything the furniture drawings need to accommodate.
- Your kitchen supplier: confirm the furniture specification and item schedule against the agreed drawing revision, and resolve questions about the products being supplied.
SJB supplies nationally. Our cabinet structure and backs are 18mm MFC, doors are 18–22mm depending on the range, and hardware includes Blum hinges and drawers. SJB does not install kitchens or sell appliances, and does not supply or arrange quartz or granite worktops. Those appointments and purchases are yours to make independently.
Give everyone one matching handover pack
Keep the layout drawing, wall elevations, cabinet schedule and furniture quotation together. Elevations show each wall from the front, making heights and tall-unit arrangements easier to check than a floor plan alone.
Add the measured-room record, relevant photographs and exact appliance information. Use consistent labels for cabinets so a query about “unit B04” refers to the same item on the drawing and schedule.
Give the pack a revision number and date, such as “Kitchen handover — revision 03 — 18 November”. Mark older copies “superseded”. If a drawing changes, identify the change in writing and check whether the schedule or quotation must change too. Do not leave the fitter to discover a moved sink by comparing two pictures.
Separate measured facts from proposed changes
The room record should show wall lengths and ceiling height, openings, door swings, window sills, pipes, radiators and service positions. IKEA UK’s measuring guidance includes these details and the space needed to open doors and windows.
Label proposed plumbing or electrical moves separately from existing positions. Record whether dimensions were taken before or after plastering and flooring. If building work will alter the room, agree with your site measurer how and when the affected dimensions will be confirmed.
Fillers are used in SJB kitchens. Show their planned locations and widths, alongside end panels, rather than treating every gap as spare cabinet space. Ask your fitter to check wall irregularities and door or handle clearances. Our kitchen measuring guide is a useful starting point for the room record.
Hand over appliance installation drawings, not just names
“Integrated fridge” or “60cm oven” is not enough. Provide the exact make and model, the manufacturer’s installation drawing and any door-fitting instructions. The cabinet opening, ventilation, connections and opening clearance matter alongside the appliance’s external dimensions.
Bosch’s oven installation guidance stresses that measurements and methods vary between models. Use your selected model’s instructions, not a generic clearance copied from another appliance.
If a model is still undecided, mark it as unresolved. A replacement appliance can affect furniture or worktop details, so tell the supplier, fitter and worktop provider where relevant before accepting a substitution.
Keep worktop requirements and templating separate
Before ordering furniture, share your intended worktop thickness, sink type, hob details and any overhangs or support requirements. Discuss these directly with your independently chosen worktop provider and fitter so the furniture design can allow for them.
That discussion is not the final worktop template. Templating is a later on-site stage used to establish fabrication details from the installed kitchen. For example, Gemini Worktops’ template guidance requires base units to be secured, level and at their final height, with end panels fitted and relevant sinks, taps and appliances available.
Obtain your chosen provider’s own checklist, including what must be fitted or simply on site, and arrange who will attend to confirm details. You coordinate this with your fitter and worktop provider; SJB does not arrange or manage the templater.
Record approval against the revision you will order
Before giving the go-ahead, ask each person to confirm their agreed checks against the named revision. A useful email identifies the drawing revision, matching schedule and quote, confirmed appliance models and any outstanding questions.
Resolve anything that could change the furniture order before releasing it. “Approved except for the fridge” leaves an important compatibility question open. Your approval should confirm your choices and instruction to order; it does not replace the supplier’s product checks or the fitter’s agreed site checks.
Keep those replies with the pack. If something changes afterwards, ask the affected parties what needs revising before assuming the old approval still applies.
Already have a Howdens quotation? Use our short quote-upload form for an SJB supply-and-delivery proposal. For a handover question about your SJB furniture order, email Steve at steve@sjball.uk with the revision you mean.

